NABL & ISO/IEC 17025:2017 Calibration Reference Portal
Official Lab Services: multitek.in
Solutions for: Quality Heads & Auditors Shop Floor Inspectors Tool Room Technicians Engineering Students

Micro Vickers Hardness Testing Systems: Principles, ASTM E384 Standards & Calibration

Hardness Testing & Calibration

Micro Vickers Hardness Testing Systems: Principles, ASTM E384 Standards & Calibration

Micro Vickers hardness testing is the primary metallurgical benchmark for evaluating microscopic phase hardness, thin coatings, surface hardening treatments, and microstructural gradients. Adhering to ASTM E384 and ISO 6507, Multitek Technologies delivers high-precision motorized and fully automated Micro Vickers systems with integrated digital image measurement software.

1. Operating Principle & Indentation Geometry

The Vickers test utilizes a square-based diamond pyramid indenter with an apex angle of 136° between opposite faces. When forced into the specimen under a pre-selected dwell time (typically 10 to 15 seconds) and microscopic test force ranging from 10 gram-force (0.098 N) to 2,000 gram-force (19.61 N), it produces a sharp square indentation.

The Vickers Hardness number (HV) is computed as the applied test force divided by the projected surface area of the indentation:

Vickers Hardness Formula:
HV = 1.8544 × (F / d²)
Where F is the applied force in kilogram-force (kgf) and d is the arithmetic mean of the two diagonal lengths (d1 and d2) measured in millimeters.

2. Technical Specifications of Micro Vickers Systems

Parameter Standard Model (MMV-1000) Auto-Turret Model (MMV-Auto) Fully Automated (MMV-Vision)
Test Force Range 10gf, 25gf, 50gf, 100gf, 200gf, 300gf, 500gf, 1000gf 10gf to 2000gf (2 kgf option) 5gf to 2000gf micro-load cell
Loading Mechanism Automatic Motorized Loading / Dwell / Unloading Motorized Dead-Weight with Closed-Loop Sensor Closed-Loop Voice Coil / Load Cell Actuator
Turret Operation Manual rotation with detent lock Motorized Automatic Turret (Dual Objective) High-Speed Programmable Motorized Turret
Optical Magnification 100× (Observation), 400× (Measurement) 100×, 400×, optional 1000× metallurgical Auto-focusing telecentric optical zoom
Stage Control Manual XY Micrometer (25 × 25 mm travel) Digital XY Micrometer (0.001 mm resolution) Motorized CNC XY Stage (100 × 100 mm travel)
Compliance ASTM E384, ISO 6507, JIS B7725 ASTM E384, ISO 6507, IS 1501 ASTM E384, ISO 6507, Nadcap AC7102

3. Metallurgical Applications: Effective Case Depth (ECD)

One of the most critical applications of Micro Vickers testing in automotive and aerospace gear manufacturing is determining Effective Case Depth (ECD) following carburizing, nitriding, or induction hardening. In accordance with SAE J423 and ISO 2639:

  • Automated traverses are executed perpendicular to the sample edge into the core material at predefined intervals (e.g., 50 µm pitch).
  • The indentation diagonal measurement software automatically identifies the threshold hardness limit (commonly 50 HRC equivalent or 515 HV).
  • The software calculates and graphs the hardness gradient curve from case to core with 0.1 µm positional repeatability.

4. Specimen Preparation Criticality (Preventing Distortion)

Because micro-indentation depths frequently measure under 2 to 5 microns, specimen surface quality directly governs measurement validity. As detailed in our Metallurgical Sample Preparation Guide:

  • Flatness & Parallelism: The test surface and bottom resting plane must be strictly parallel within 1° to prevent asymmetric indentations.
  • Surface Finish: Final polishing must reach a scratch-free mirror finish using 0.05 µm colloidal silica or 1 µm diamond suspension.
  • Cold-Work Removal: Mechanical cut-off burning or severe grinding deformation alters the surface crystalline lattice, falsely inflating hardness values by 15% to 35%.

5. Metrological Verification & NABL ISO/IEC 17025 Calibration

Multitek Calibration Pvt. Ltd. provides complete on-site and in-lab calibration for Micro Vickers machines in compliance with ASTM E384 and ISO 6507-2:

Direct Calibration: Verification of applied test forces using NABL-calibrated proving rings and sub-micron micro-load cells; optical microscope magnification calibration using stage micrometers traceable to NPL (National Physical Laboratory, India); dwell time verification with calibrated digital chronometers.

Indirect Calibration: Routine verification using certified reference hardness blocks across low, medium, and high hardness ranges (e.g., 200 HV, 500 HV, and 800 HV).

Frequently Asked Questions

What is the difference between Micro Vickers and Macro Vickers testing?

Micro Vickers operates at microscopic loads between 10gf and 1kgf (or 2kgf), making it ideal for coatings, foils, individual grains, and surface-hardened layers. Macro Vickers utilizes loads from 1kgf up to 50kgf or 100kgf to evaluate bulk material properties.

How often should a Micro Vickers tester be verified?

Daily or prior-to-use indirect verification should be performed using an NABL-certified standard test block at the operating load. Formal direct and indirect calibration should be executed annually under ISO/IEC 17025:2017.

Why do indentation diagonals appear asymmetric or distorted?

Asymmetric diagonals typically occur when the specimen is tilted relative to the indenter axis, if the specimen surface is unpolished or curved, or if the diamond indenter tip is chipped or contaminated.

Need Expert NABL Calibration or Metrology Equipment Support?

Connect directly with Multitek Technologies engineers for equipment demonstrations, on-site maintenance, or ISO/IEC 17025 accredited calibration services.

Request Technical Quotation / Demo
Hardness Testing & Calibration

Micro Vickers Hardness Testing Systems: Principles, ASTM E384 Standards & Calibration

Micro Vickers hardness testing is the primary metallurgical benchmark for evaluating microscopic phase hardness, thin coatings, surface hardening treatments, and microstructural gradients. Adhering to ASTM E384 and ISO 6507, Multitek Technologies delivers high-precision motorized and fully automated Micro Vickers systems with integrated digital image measurement software.

1. Operating Principle & Indentation Geometry

The Vickers test utilizes a square-based diamond pyramid indenter with an apex angle of 136° between opposite faces. When forced into the specimen under a pre-selected dwell time (typically 10 to 15 seconds) and microscopic test force ranging from 10 gram-force (0.098 N) to 2,000 gram-force (19.61 N), it produces a sharp square indentation.

The Vickers Hardness number (HV) is computed as the applied test force divided by the projected surface area of the indentation:

Vickers Hardness Formula:
HV = 1.8544 × (F / d²)
Where F is the applied force in kilogram-force (kgf) and d is the arithmetic mean of the two diagonal lengths (d1 and d2) measured in millimeters.

2. Technical Specifications of Multitek Micro Vickers Systems

Parameter Standard Model (MMV-1000) Auto-Turret Model (MMV-Auto) Fully Automated (MMV-Vision)
Test Force Range 10gf, 25gf, 50gf, 100gf, 200gf, 300gf, 500gf, 1000gf 10gf to 2000gf (2 kgf option) 5gf to 2000gf micro-load cell
Loading Mechanism Automatic Motorized Loading / Dwell / Unloading Motorized Dead-Weight with Closed-Loop Sensor Closed-Loop Voice Coil / Load Cell Actuator
Turret Operation Manual rotation with detent lock Motorized Automatic Turret (Dual Objective) High-Speed Programmable Motorized Turret
Optical Magnification 100× (Observation), 400× (Measurement) 100×, 400×, optional 1000× metallurgical Auto-focusing telecentric optical zoom
Stage Control Manual XY Micrometer (25 × 25 mm travel) Digital XY Micrometer (0.001 mm resolution) Motorized CNC XY Stage (100 × 100 mm travel)
Compliance ASTM E384, ISO 6507, JIS B7725 ASTM E384, ISO 6507, IS 1501 ASTM E384, ISO 6507, Nadcap AC7102

3. Metallurgical Applications: Effective Case Depth (ECD)

One of the most critical applications of Micro Vickers testing in automotive and aerospace gear manufacturing is determining Effective Case Depth (ECD) following carburizing, nitriding, or induction hardening. In accordance with SAE J423 and ISO 2639:

  • Automated traverses are executed perpendicular to the sample edge into the core material at predefined intervals (e.g., 50 µm pitch).
  • The indentation diagonal measurement software automatically identifies the threshold hardness limit (commonly 50 HRC equivalent or 515 HV).
  • The software calculates and graphs the hardness gradient curve from case to core with 0.1 µm positional repeatability.

4. Specimen Preparation Criticality (Preventing Distortion)

Because micro-indentation depths frequently measure under 2 to 5 microns, specimen surface quality directly governs measurement validity. As detailed in our Metallurgical Sample Preparation Guide:

  • Flatness & Parallelism: The test surface and bottom resting plane must be strictly parallel within 1° to prevent asymmetric indentations.
  • Surface Finish: Final polishing must reach a scratch-free mirror finish using 0.05 µm colloidal silica or 1 µm diamond suspension.
  • Cold-Work Removal: Mechanical cut-off burning or severe grinding deformation alters the surface crystalline lattice, falsely inflating hardness values by 15% to 35%.

5. Metrological Verification & NABL ISO/IEC 17025 Calibration

Multitek Calibration Pvt. Ltd. provides complete on-site and in-lab calibration for Micro Vickers machines in compliance with ASTM E384 and ISO 6507-2:

Direct Calibration: Verification of applied test forces using NABL-calibrated proving rings and sub-micron micro-load cells; optical microscope magnification calibration using stage micrometers traceable to NPL (National Physical Laboratory, India); dwell time verification with calibrated digital chronometers.

Indirect Calibration: Routine verification using certified reference hardness blocks across low, medium, and high hardness ranges (e.g., 200 HV, 500 HV, and 800 HV).

Frequently Asked Questions

What is the difference between Micro Vickers and Macro Vickers testing?

Micro Vickers operates at microscopic loads between 10gf and 1kgf (or 2kgf), making it ideal for coatings, foils, individual grains, and surface-hardened layers. Macro Vickers utilizes loads from 1kgf up to 50kgf or 100kgf to evaluate bulk material properties.

How often should a Micro Vickers tester be verified?

Daily or prior-to-use indirect verification should be performed using an NABL-certified standard test block at the operating load. Formal direct and indirect calibration should be executed annually under ISO/IEC 17025:2017.

Why do indentation diagonals appear asymmetric or distorted?

Asymmetric diagonals typically occur when the specimen is tilted relative to the indenter axis, if the specimen surface is unpolished or curved, or if the diamond indenter tip is chipped or contaminated.

Need Expert NABL Calibration or Metrology Equipment Support?

Connect directly with Multitek Technologies engineers for equipment demonstrations, on-site maintenance, or ISO/IEC 17025 accredited calibration services.

Request Technical Quotation / Demo