NABL & ISO/IEC 17025:2017 Calibration Reference Portal
Official Lab Services: multitek.in
Solutions for: Quality Heads & Auditors Shop Floor Inspectors Tool Room Technicians Engineering Students

Traceability vs Accreditation in Torque Calibration


Traceability vs Accreditation in Torque Calibration: They Are Not the Same

A calibration can be traceable without the service being accredited, and a laboratory can be accredited without every service it offers being inside its accredited scope. Confusing these two ideas creates weak purchasing and certificate-review decisions.

What metrological traceability means

ILAC P10:07/2020 explains that metrological traceability relates to measurement results and reference quantity values through a documented calibration chain with stated uncertainties. It is not simply a statement that a particular well-known organization was involved somewhere in the chain.

For a torque calibration, the laboratory should have an appropriate traceability chain for the reference torque measurement system used to establish the result.

What accreditation means

ISO/IEC 17025:2017 is the international standard used by accreditation bodies to assess testing and calibration laboratories. In India, NABL FAQ accredits calibration laboratories to ISO/IEC 17025.

Accreditation is an independent assessment of laboratory competence for a defined scope. It therefore adds evidence about the laboratory's technical and management system, but only for the activities covered by the scope.

Why "traceable to NABL" is poor wording

NABL is an accreditation body. It is not the physical reference standard to which a torque value is traceable.

A better way to speak is to separate the ideas:

  • the measurement result has metrological traceability through a documented calibration chain;
  • the laboratory is NABL accredited for the relevant activity and range.

Why accreditation logos are not enough

A laboratory can provide both accredited and non-accredited services. Always confirm whether the specific certificate and activity are within scope.

For torque tools, also check whether the method and range are relevant. ISO 6789-2:2017 covers calibration of hand torque tools and uncertainty determination.

When traceability may be sufficient

Some internal or lower-risk measurement systems may not contractually require accredited calibration. In those cases, an organization may accept another technically justified route to traceability and competence.

That decision should be deliberate. Do not downgrade an explicit customer, regulatory or approved-procedure requirement simply because a non-accredited provider says the result is traceable.

When accredited calibration is the clearer choice

Accredited calibration can simplify supplier qualification where customers, audits or regulated processes expect independent evidence of competence. It can also reduce the amount of technical evaluation the purchasing organization must perform itself.

The purchasing requirement should therefore state whether you need traceability, accredited calibration or both.

A useful certificate review question

Ask two separate questions:

Question 1: What evidence supports metrological traceability of this measurement result?

Question 2: Is this specific calibration activity within the laboratory's current accredited scope?

Those two questions prevent one label from being used to answer two different technical requirements.

Frequently Asked Questions

Is traceable calibration the same as accredited calibration?

No. Traceability concerns the measurement result and its calibration chain. Accreditation is independent recognition of laboratory competence for a defined scope.

Can an accredited laboratory issue a non-accredited certificate?

Yes. Laboratories may provide services outside their accredited scope, so the specific activity and certificate status should be checked.

Is NABL the source of measurement traceability?

No. NABL is an accreditation body. Metrological traceability relates to measurement results and reference values through an appropriate calibration chain.

Write purchasing requirements that distinguish traceability from accreditation

Specify exactly what evidence the calibration must provide before the tool is sent to the laboratory.

Authoritative Sources

Technical note: Customer, sector and regulatory requirements can make accredited calibration mandatory even when a technically traceable alternative could otherwise exist.