Torque Wrench Calibration Purchase Order Checklist: What to Specify Before Sending the Tool
A vague purchase order can produce a technically valid service that still does not meet your quality-system need. Define the required evidence before the wrench leaves your site.
1. Identify the exact tool
Provide asset ID, manufacturer, model, serial number and torque range. If several tools are shipped together, make the packing list traceable to the purchase order.
2. State the calibration requirement
If the job requires calibration of a hand torque tool to the applicable ISO method, state the requirement clearly. ISO 6789-2:2017 covers calibration and measurement uncertainty for hand torque tools.
Avoid vague wording such as "check and certify" when your process actually requires calibration.
3. Specify accreditation where required
If NABL-accredited calibration is mandatory, put that on the order. NABL FAQ states that NABL accredits calibration laboratories in accordance with ISO/IEC 17025.
Also require the calibration to be within the relevant accredited scope and range. A laboratory's general accreditation status is not enough.
4. Request as-found results before adjustment
If historical impact matters, request as-found measurements before adjustment or repair where technically possible.
Without as-found information, it can be harder to determine whether work completed since the previous calibration needs review.
5. Define repair and adjustment authorization
Do you want the provider to adjust automatically, or contact you before intervention? Should repair above a cost threshold require approval?
Separating these instructions preserves control over both cost and evidence.
6. State the reporting expectations
Depending on your quality system, request:
- measurement results;
- measurement uncertainty;
- as-found and as-left information where applicable;
- tool identification;
- method or reference used;
- traceability information;
- accreditation status for the specific service;
- statement of conformity only when required and supported by an agreed decision rule.
ILAC P14:09/2020 addresses uncertainty in calibration, while ILAC P10:07/2020 addresses metrological traceability.
7. Make the required range explicit
If your wrench is only used in a specific portion of its range, tell the laboratory. This does not override an applicable standard method, but it helps the provider understand the critical operating region and any additional points you may require.
8. Define turnaround and return conditions
Packaging, transport and handling can matter for controlled equipment. Specify protective return packaging where necessary and make sure the receiving inspection checks for transit damage.
Purchase order template
Service: Hand torque wrench calibration
Standard/method: [enter applicable requirement]
Accreditation: [NABL-accredited within scope, if required]
As-found data: Required before adjustment where technically possible
Repair/adjustment: Contact customer before intervention above [limit]
Reporting: Results, uncertainty, traceability, as-found/as-left as applicable
Range: [enter tool range and critical working region]
Return packaging: Protect from shock and contamination
Frequently Asked Questions
Why request as-found results?
They can support assessment of previous work if the wrench arrived outside acceptance limits.
Should the purchase order say NABL accredited?
Yes when accredited calibration is required. Also verify that the relevant torque activity and range are within the laboratory's current scope.
Should I authorize automatic adjustment?
Only if that matches your quality-system needs. Where as-found evidence matters, require measurement before adjustment whenever technically possible.
Turn purchasing instructions into measurement control
Use a standard torque-calibration purchase-order template so critical evidence is requested before the tool leaves your site.
Authoritative Sources
Technical note: The checklist is a procurement framework, not a substitute for customer, regulatory or sector-specific contract requirements.
