NABL & ISO/IEC 17025:2017 Calibration Reference Portal
Official Lab Services: multitek.in
Solutions for: Quality Heads & Auditors Shop Floor Inspectors Tool Room Technicians Engineering Students

How to Build a Calibration Recall System for an Aviation MRO

 

A recall system should prevent expiry, not merely report it

A calibration register tells you when a tool is due. A recall system turns that date into action before an expired tool reaches a maintenance task.

FAA AC 145-9A says calibration procedures should define how and when equipment is recalled and identify who is responsible for ensuring it is returned and properly controlled. Its calibration checklist also asks whether equipment is removed from service when calibration becomes due and how overdue or lost equipment is handled. [17]

EASA AMC requires a system that indicates to users whether tooling is within its inspection/service/calibration time limit, supported by clear labeling and a precision-tool register. [36]

Use states, ownership and escalation

A practical MRO workflow can use statuses such as Available → Due Soon → Recalled → At Laboratory → Quarantined/OOT → Certificate Review → Released.

Assign each asset a custodian, calibration owner and due date. Generate advance reminders early enough to accommodate external-laboratory turnaround and replacement-tool planning. When the due point is reached without an approved renewed status, prevent issue under the organization's procedure rather than merely leaving the record highlighted in red.

The regulators cited here do not specify a universal 30-, 60- or 90-day alert period. Set the warning window according to laboratory lead time, tool criticality, utilization and operational needs.

Review intervals with evidence

Calibration history can support interval management. ILAC G24:2022 provides guidance on determining and reviewing recalibration intervals for measuring equipment; FAA guidance also expects adequate recorded calibration data before increasing an interval. [37]

Create an original timeline showing 90/60/30 days only as an illustrative configuration, not a legal requirement. Better still, label alerts “Configured Warning A/B/C.” Add a swim-lane diagram for Tool Crib → Quality → Calibration Provider → Quality → Tool Crib.

Copyable recall register

Asset ID

Due date

Warning date

Custodian

Current status

Substitute available?

Recall sent

Received from user

Sent to lab

Certificate reviewed

Released

 

 

 

 

 

 

 

 

 

 

 

Recall rule template

At the configured recall threshold: notify the custodian and plan replacement.
At the calibration due limit: control the asset according to the organization's QCM/MOE procedure and prevent unverified use.
After calibration: do not change status to released until the certificate and tool identification have been reviewed.

This is an operational template, not a regulator-prescribed lead-time formula. [17]